The TMAR-KC cylinder-type or ‘canon’ TAJIMA range open the way to version 2, with an even higher performance level in terms of technology. It includes innovative and practical features to produce embroidery to brighten your world.



DCP function

The digitally controlled independent presser foot is a revolutionary device developed by TAJIMA.


Enables you to produce ‘hand-made’ and lace style embroidery

Reinforced working efficiency

Direct command keys have been placed on each head

Request for demo


Request for prices


General characteristics

Digitally-controlled presser foot DCP


By digitally controlling fabric pressing, the DCP can be set to the thickness of the fabric so as not to over press the material causing shadows or damage.
Also, by optimizing the timing of fabric pressing, the DCP can suppress the "fluttering" of the embroidery material, beautifully finishing precision embroidery. The DCP is very effective for hard-to-embroider materials like leather, thick fabric, stretchy fabric and quilting.


Preserving the embroidered by hand texture or lace embroidery - Equipped with the FS mode

The FS mode, which has made the TFGN Il Series so sought-after, can optimally tune the embroidery machine, and thereby reduce the burden on the yarn and improve the stability and quality of embroidery.




Furthermore, by using parts specially designed for the FS mode (option), even difficult-to-embroider soft twist thread and thick thread can be embroidered. 

*When the FS mode is used, the rotational speed may be lowered.
*The FS mode is applicable only to the tubular frame and the cylindrical frame. 


Direct command switch

Various operation switches and multi-color LEDs are located on the each head. 

Since ail of the main functions of the operation panel can be manipulated from each head, the working efficiency of operators has been improved. Commonly used functions may be assigned to the custom switches. (Scheduled for 2016) 

Major boost of cap embroidery turnout

The newly-designed Slim Cylinder Bed, which has a downsized diameter compared to the conventional cylinders by about 12%, has widened the range of application so as to cover tubular products, such as sleeves and pockets.

The Wide Cap Frame also has been newly designed to upgrade the rigidity coinciding with the Slim Cylinder Bed. This frame has enhanced the embroidery stability whereby incresing the rotational speed to 1000 rpm.
(900 rpm for +4mm) .

To craft embroidery down to the finest detail, TMAR-KC II boasts an innovative system known as the ‘DCP feature’ with the inclusion of a presser foot which is controlled digitally from a tactile control panel.


The cylinder type TMAR-KC II TAJIMA range, representing the latest in innovation by TAJIMA, has now arrived. It is the embodiment of TAJIMA technology for highly efficient production, the highest quality, robustness and unparalleled performance.


To craft embroidery down to the finest detail, TMAR-KC II boasts an innovative system known as the ‘DCP feature’ with the inclusion of a presser foot which is controlled digitally from a tactile control panel and whichenables users to adjust the position from bottom dead centre as well as the strength of each needle to be adjusted independently.


The stitching strength is thereby configured in accordance with the type of material, which ensures there is no movement of the material and this leads to considerably fewer thread breaks when starting the machine.  The independent presser foot allows for ultra-precise embroidery on materials such as leather, thick or very fine and even delicate fabrics, layered materials and embroidery with foam for a 3D effect on caps.


The precision of needle penetration has been increased by 60% and this ensures a very neat finish even for detailed embroidery.


The development of another feature, called ‘fine stitch mode’, reduces the tension on the thread, which can be very useful if you use particularly challenging threads such as twisted or very thick thread. You’ll feel as though you’ve produced hand-made or lace style products.  


The tighter cylinder arm facilitates embroidery on finished goods such as pockets or sleeves. The reinforced cap frame combines a stable production of your embroideries with a potential rotation speed of 1,000 rpm.


Several control keys and coloured LEDs have been placed on each head, thereby granting access to all of the main features: work efficiency is optimised for users and less movement is required.


Various optional tools and devices are available to enable the production of a large variety of articles:

  • twin type or simple type sequin device,
  • multi-cording device which enables embroidery with 6 types and/or different coloured cords,
  • a position marker,
  • an automatic lubrification system,
  • bobbin changer,
  • beam sensor
  • and LED lighting.

Different types of de frames can be fitted to this machine, depending on your needs:

  • tubular frames of different types to match your articles (for embroidery on t-shirts, sweatshirts and jackets),
  • the wide cap or semi-wide cap reinforced frame,
  • a border frame for embroidering badges or appliqués,
  • and the pocket frame.

Explore other options

Sequin Device III Twin type

It is now possible to embroider up to 4 types of sequins of various size, shape and colour on each head!

Know more

Sequin Device IV

Embroider a range of different sequins: small-diametre sequins, large-diametre sequins, unusually-shaped sequins and asymmetrical sequins.

Know more

Multi Cording Device

The multi cording device is the first of its kind in the industry and offers the option to embroider 6 different cording types.

Know more

See all machine options